Deck automatically saving

 avatar
pervenc avatarpervenc
{"ops":[{"insert":"My decks have being automatically saved, i did not find where to disable it, i play not only virtually, by mostly on paper, and i use this site to keep track of my decks, what i do is to remove cards from the deck one by one to check the cards i have on that deck in paper, but now i can't do that, because when i remove a cards the deck is being saved without my request. Can i make so the decks are only saved when i click on \"save\"?\n"}]}
0
 avatar
{"ops":[{"insert":"(I apologize in advance if this response feels somewhat generic -- I'm trying to cover as much ground as possible for anyone who's commented recently on the idle screen and/or save issues)\n\nToday (11-14-22) we pushed out an update to the idle screen. Instead of a full page overlay, it's now just a popup notification at the bottom of your screen after 15 minutes of idling. You can either reload the page directly from it (which we would recommend if you're working on it from multiple tabs/devices to make sure you're still on track), or just close the popout out. We're hoping this feels much less disruptive to folks, but would certainly appreciate feedback. \n\nImportantly, we also made a change that we believe could fix the issue that some users were experiencing with unexpected card losses while editing. At the absolute least, you should now receive a notification if cards aren't saving properly so we don't waste your time working on a deck that's gotten into a bad state. If you see this error regularly, please do let us know because it means that the problem we resolved today wasn't the whole story.\n\nWe appreciate everyone's patience as we work to dial this in. We believe we're getting close, but continue welcome feedback as we make our tweaks. \n"}]}
0
 avatar
{"ops":[{"insert":"Autosave was implemented for a number of reasons. Partially because it was our most requested feature for a couple of years, but also because it should greatly reduce the number of errors folks experience while deck building. Automatically saving after ever change is far less likely to break and get users into a bad state than making a ton of edits and trying to commit them all at once. There was a brief period of time we offered both auto and manual, but the intention was the always move fully to auto both to streamline code and remove a variable when troubleshooting with users.\n\nAutosave had been working great since we implemented it back in June. Across the board, we've seen a significant drop in saving errors. That said, we introduced a different method of saving on the backend last week as the first step in our move toward real-time updates to decks (sorta like how Google docs update live to all individual editing/viewing them) that has created a few problems. This is something we're actively investigating and will ultimately either fix or rollback.\n\nIn short, the issues users are currently experiencing are not a byproduct of autosave, or even the new idle screen, but something else entirely with how we're now trying to save decks. It's current state is too unreliable and, ultimately, unacceptable. We're doing our best to diagnose the issue and implement a solution. We apologize to anyone negatively affected in the meantime and appreciate your patience!\n"}]}
0
 avatar
pervenc avatarpervenc
{"ops":[{"insert":"Not only that the automatic saving is not saving the changes (as you said), and i CANNOT manually save it, the site was working so good, why remove a function to add one that does not works ^^''\n"}]}
0
 avatar
TeamDman avatarTeamDman
{"ops":[{"insert":"Sometimes it says saved but then if I refresh all the changes are gone, so it's not to be trusted\n"}]}
0
 avatar
{"ops":[{"insert":"(I apologize in advance if this response feels somewhat generic -- I'm trying to cover as much ground as possible for anyone who's commented recently on the idle screen and/or save issues)\n\nToday (11-14-22) we pushed out an update to the idle screen. Instead of a full page overlay, it's now just a popup notification at the bottom of your screen after 15 minutes of idling. You can either reload the page directly from it (which we would recommend if you're working on it from multiple tabs/devices to make sure you're still on track), or just close the popout out. We're hoping this feels much less disruptive to folks, but would certainly appreciate feedback. \n\nImportantly, we also made a change that we believe could fix the issue that some users were experiencing with unexpected card losses while editing. At the absolute least, you should now receive a notification if cards aren't saving properly so we don't waste your time working on a deck that's gotten into a bad state. If you see this error regularly, please do let us know because it means that the problem we resolved today wasn't the whole story.\n\nWe appreciate everyone's patience as we work to dial this in. We believe we're getting close, but continue welcome feedback as we make our tweaks. \n"}]}
0
 avatar
{"ops":[{"insert":"Responding here just to give you a notification that I've responded to the OP above. \n"}]}
0
 avatar
pervenc avatarpervenc
{"ops":[{"insert":"BTW it always worked like that, i saved only when i wanted, idk why the option to save when you want was removed (or hidden?)\n"}]}
0
 avatar
pervenc avatarpervenc
{"ops":[{"insert":"I mean, that's the thing, i want it to never save, its not like saving something is bad and it should always save, can i make so it never works\n"}]}
0
Support us on Patreon to remove ads